autowatch ghost immobiliser 2 Immobiliser Problems

It is designed to safeguard vehicles from hacking and key cloning, The Ghost 2 immobiliser is a discrete device that can be fitted without causing damage to your car. It stops your car from starting unless you press an exact sequence of keys inside your vehicle similar to a password on mobile phones.

Stop/Start

Ghost Ii Immobiliser immobilisers protect vehicles from being stolen by stopping the engine from starting until it receives the right PIN code. This is done without modification to the vehicle and is totally undetectable to thieves. The unit communicates with the ECU on the CAN data bus to immobilise the vehicle. This is the same system that used by car manufacturers for a long time. However, thieves are unable to bypass it with a new key or key relay technology, as they could with factory-installed systems.

A Ghost can be fitted to any car, van, motorhome, caravan or bicycle that has an engine. It's compatible with all popular makes of vehicles. The same system can be utilized on electric vehicles. It is an excellent alternative to steering wheel locks and wheel clamps, and can be installed with little effort.

When the Ghost is armed it will block all the buttons in your vehicle and stop the ignition from starting unless a PIN code has been entered prior to. This can be accomplished using the Android or Apple mobile apps or by manually entering the code through your key fob. If the wrong code is entered, the app will display an indicator light. The Ghost will not let the vehicle be started again. This is a great deterrent and if the vehicle can't be started the thief will move on to another target.

The Ghost is a weatherproof, small device that can be tucked behind the most difficult-to-access areas of your vehicle. It is incredibly easy to install, taking an average of 20-30 minutes per vehicle. It is also very easy to remove should you choose to change your vehicle or hand it in for valet parking or service. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is endorsed by a number of insurance companies. It also comes with an emergency lock that is secure Pin Code Override, and the Service/Valet feature that can be activated by pressing a button on the app, or by using your key fob.

Disarm

Ghost immobilisers, unlike mechanical devices to prevent theft that can be removed, are concealed within the car. Even if they were discovered in the car, thieves wouldn't be able to start the car. They are almost impossible to hack or bypass. Ghost immobilisers are capable of preventing key cloning and signal jamming and devices spoofing. These are methods that thieves employ to gain entry to vehicles with standard immobilisers.

An immobiliser functions by sending an instruction to the ECU (electronic control unit). If the wrong code is received, the vehicle cannot be started because the engine won't start up. It is possible to disable a ghost immobiliser with an application program, but it's extremely time-consuming and difficult to do so. The software must be installed and used by an authorized installer.

The Ghost immobiliser ghost is a tiny system that sits within the wiring loom of the vehicle and is not visible to the naked eye after it has been installed. It is not visible on diagnostic systems. There are no indicators with LEDs, and it doesn't communicate with the engine through the OBD port. It communicates in silence via the CAN data loop.

The system will stop the vehicle from starting until it receives a user defined PIN code sequence. This can be entered using buttons on the steering wheel, door panels or centre console. This is a much safer way to safeguard your car since it doesn't require keys or remote control.

In addition to this Ghost has an option for service that can be activated through the application on your mobile phone. This will allow you to give your keys to a person for servicing or valet parking without entering the disarm sequence.

You should not remove the system from your Ghost by yourself, regardless of whether it is in service mode. This could damage the engine. It is best to contact an installer certified by TASSA who will safely and properly remove the system. Our newest GHOST II immobilisers come with the QR fingerprint stickers that is hidden in different locations of your vehicle. which are linked to our global security register - in the event that the system is removed and then sold on the black market it will be linked back to its original owner.

Anti-Hijack

The anti-hijack feature is an essential feature of the ghost immobiliser cost Immobiliser 2. This system is a smart key that guards your car from theft. When the ignition switch is turned to on, and the vehicle is stationary for 30 seconds, the Ghost system will automatically stop the engine and turn the hazards lights on. This allows the driver and passengers time to press the hidden security button before the system is activated.

Contrary to many other systems that simply stall the engine once the ignition is switched on, the Ghost system has a unique controller and timer that will close the fuel cut-off valve 14 when it is activated after the set time even in the event that the ignition is turned on! This delay time period must be sufficiently long to allow the owner of the vehicle who was hijacked of the vehicle to move away from the scene of the robbery and sufficient distance from the stalled vehicle before the system can be activated.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it also comes with an extra security level that blocks common methods of hacking used to gain access to modern vehicles, such as relay attacks, key range extending and ECU swapping. The ghost car immobiliser system communicates in a silent way and does not emit signals that can be detected by thieves using code-grabbing technology or RF scanning.

The Ghost system comes with a service / valet mode which allows your vehicle to temporarily be started and driven without the requirement for a PIN code. This is ideal when you park your vehicle and only need to leave it for a brief time, such as to open the garage door or put groceries in the boot. The system will exit service mode according to speed and duration or through the simple PIN code entry procedure, giving you complete assurance that only YOU can utilize your vehicle!

Keyless Entry

With the rise of theft of cars using contactless technology numerous people are considering additional security options. This is especially relevant for those who have invested time and money in customizing their vehicles or own expensive automobiles. An add-on immobiliser can be an effective way to avoid this type of theft as it can stop your vehicle from starting unless the correct pin code is entered on your key fob.

Immobilisers are designed for various vehicle circuits, including those that control starter motors and fuel pumps. They can also shut off the car alarm in order to attract attention and scare away potential thieves.

These devices are directly connected to the engine control unit through the CAN data network. They hinder thieves from gaining access to it by installing a replacement ECU or using key programmers. These immobilisers can be fitted in a discreet manner inside your vehicle, leaving no marks and are completely inaccessible to the tools hi-tech thieves use.

In contrast to other systems that require a separate application, or a tag to be carried on the person carrying it, a Ghost immobiliser can only be disarmed by pressing a series of existing electronic buttons on your steering wheel, door panel, and central console, allowing you to select a customized pin sequence. The pin can be changed as often as you want, which means the device is as secure as a credit card. It can be even more difficult to hack because it requires up to 20 presses.

Ghost also has a Valet/Service mode, which allows users to deactivate it when you are going to hand over your vehicle to valet parking, or service. This allows the system to operate within the parameters, such as a 30-mph speed limit. The system can be reactivated using the original key or corresponding entry code.

This makes it the most effective and secure aftermarket CAN-based immobiliser on the market. It is insurance approved by Thatcham as an optional accessory for your car when installed by one of our certified installers. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels as well as an ISR contact card that contains your unique QR code as well as an emergency code that is secure that you keep in the wallet/purse of your car.